Disposable containers are containers made from plastic or cardboard. These containers are produced and offered in various shapes and sizes. Of course, new generations of these containers are made and offered from various polymers such as polystyrene foam.polymer
These containers, which are mainly made of plastic, are made and produced from different polymers. Including:
High-density polyethylene
Polypropylene
Polystyrene
The use of each of these containers also differs depending on the type of raw material used in it.polymer
Pet
In order to produce colorful and diverse plastic containers in different types, preform molds must be used. Standard and diverse shaping of plastic bottles is possible through preform molds. These efficient molds will be able to produce high-quality bottles by creating a variety of sizes and shapes.
Plastic containers available on the market are created by injecting raw plastic materials into PET bottles. The materials that are poured into the preform mold are polyethylene terephthalate, which can be converted into various plastics. If you want to increase your information about PET bottles, stay with us.
What is a PET bottle?
Polyethylene terephthalate (PET or PETE) is derived from the words PolyEthylene Terephethalate and is classified as a long-chain polymer belonging to the polyester family. The materials used to produce PET are: pure terephthalic acid and ethylene glycol, both of which are derived from petroleum raw materials.
This polymer is one of the most widely used thermoplastic polymers worldwide. This polymer is known in the textile industry under the trade name polyester. PET has a transparent, plastic and semi-crystalline appearance and shape. The application and uses of PET are in three main areas as follows. In textiles as a fiber in clothing production, as a moisture barrier in the packaging and bottling industries and other industries related to these two cases, the third is used as an engineering plastic, which is combined with other materials such as glass fiber, increasing the strength of the material.
Agricultural brigade tape
Thin strips of polyethylene that are soft and completely flexible. As water enters the tank, the strips fill up and become flat again after irrigation is complete. Since the strips are installed near the roots of the crops to specifically irrigate the area around the plant, water is used optimally and there is no waste.
Granules
Granules are a form of polymer that is produced in the form of small, uniform granules. These granules are created from polymers produced in petrochemicals after the extrusion process using cutting machines. Granules are of great importance due to their wide applications in various industries including plastics, construction, pharmaceuticals, and agriculture.polymer
Injection molding
Injection molding is a method of manufacturing metal or plastic parts using raw materials such as glass, polymers, elastomers, and metals. In this method, the raw materials required to manufacture the part are melted and injected into a pre-prepared mold using a molding machine and levers and pistons at a certain pressure.
The molds used in injection molding machines are often designed to vent the molten material and its heat to the outside through vents. This helps the molten material inside the mold cool and form better. After cooling, the material takes on the shape of the mold and exits the molding machine as a functional part.
Woven polypropylene
Polypropylene bags are made by melting plastic at extremely high temperatures. It is then molded into long strips, which are then woven to create a strong plastic web. These woven polypropylene sheets are then cut and stitched to form the bag.
Blow molding containers
Blow molding is generally a process of producing hollow plastic parts of various dimensions. This production process can be considered one of the cost-effective processes for mass production of plastic parts. It should be noted that the raw materials of this process are thermoplastics.polymer
HDPE Granules are a type of thermoplastic resin made from polyethylene. They are used in a variety of industries and applications including plastic manufacturing, packaging, and electronics. HDPE Granules are popular due to their low cost, easy processing characteristics, and excellent mechanical properties.
The HDPE Granules offered by us are of Industrial Grade and have a purity of 100%. These granules come in a granular form and are used in various industrial applications. They have a high melting point and a good thermal resistance, making them ideal for use in plastic products.
Grade PE100
PE100 is one of the best materials in the production of pipes; this material is one of the newest and lightest materials in the production of polyethylene pipes. The pipes created by PE100 having high density have less weight and have shown a higher tolerance threshold against strong pressures.
Embrace the pinnacle of plastic manufacturing with our premium HDPE-100 granules, a testament to our unwavering commitment to quality and expertise. These exceptionally pure granules, sourced from the finest raw materials, are the cornerstone of a diverse range of high-performance applications, ranging from durable pipes and containers to innovative consumer products.
What is a granule? Polymers produced in petrochemicals are made into a special form for ease of use, which is called granules.
Granules can be produced from new polymers and used in a wide range of plastic industries, including rubber production, electrical cables, and various materials needed for product packaging.
In addition, recycling plastic waste into usable granules is also expanding, which is the raw material for many industries, including rubber, asphalt, and the main furnace fuel.
Granular polypropylene (PP) is a type of thermoplastic polymer with the following characteristics:
1. high mechanical strength,
2. low density
3. heat resistance,
4. chemical resistance
5. transparency,
6. recycling.
Features depend on the type of PP
granule
LLD NATURAL
Light polyethylene has the following characteristics:
1. flexibility and deformation
2. Transparency
3. Chemical resistance,
4. Heat resistance
5. Recycling
6. Moisture resistance
White, Black, Customizable
Polyethylene (PE) Polyethylene is a thermoplastic which is used in a wide variety of products. It gets the name from the ethylene monomers. Polyethylene is generally used for the plastics industry. Ethylene molecule, C2H4 is actually linked to the double bond contents, CH2, ethylene (CH2 = CH2). Polyethylene is produced by polymerization of ethylene. Different polymerization methods can be used for polyethylene polymerization such as radical polymerization, anionic polymerization, ion coordination polymerization and cationic polymerization. Each of these methods provides different types of polyethylene production.
Color : BLACK , WHITE
PE100 is a type of high-density polyethylene that is used in various industries, including oil. gas chemical industry. It is used in water and sewage industries and agriculture. Its characteristics are: It has outstanding physical and mechanical properties, such as high resistance to impact, pressure, heat, chemical resistance, flexibility, etc., which is considered as PE100.which our company specializes in.
NATURAL
PS is a type of polymer material that is used to make plastic pipes and sheets of industrial parts. Its features are:granule
1. High impact resistance.
2. High heat resistance
3. High flexibility
4. Chemical resistance
5. Light weight 6. recyclable.
These characteristics depend on the type and quality of the granule and its polymer structure.
Respect for people, society and thet management approach such as access to necessary information and documents, participation in management, audit and accountability from wrong parties and we do our work with this understanding.
Customer Orientation
In line with customer expectations, we try to maintain customer satisfaction at the highest level by evaluating each process that affects service quality separately and continuously improving. We add value to our customers with high quality services.
Innovation
We believe that change contributes to the development of our company, and in this regard, we follow the innovations in the world and the sector, especially technological innovations, and use them in our business.
participation
We consider all kinds of suggestions, complaints and notices sent by related parties as an opportunity to help develop our company. Instead of complaining, we generate solutions and help develop.
leadership
We contribute personal and corporate development to leaders who share information for the organization’s goals and influence and lead other employees in a positive way. We encourage leadership at all levels and provide opportunities for employees to develop their leadership capacity.
sustainability
We are responsible for the future and use our resources with this awareness of responsibility. We help in development by considering the economic, social and environmental balance, taking into account the needs and expectations of all stakeholders.
